Scotland

Timber doors in Ayrshire

We survey, make and fit made-to-measure timber doors throughout Ayrshire, covering 8 towns from the workshop to the fitted door.

Coastal openings. Ayr, Irvine, Troon, Prestwick, Largs, Saltcoats and others sit close enough to open water that salt-laden air drives the specification: Accoya or dense hardwood, a high-build microporous coating and grade A4 marine stainless ironmongery.

Door types we make for Ayrshire

All twenty-four types are available here, supplied and fitted with a ten-year guarantee.

Timber Front Doors

Made-to-measure front doors in engineered or solid timber, factory finished.

from £1,350 per door

See timber front doors →

Oak Front Doors

Solid European oak entrance doors with a natural oiled or stained finish.

from £2,400 per door

See oak front doors →

Hardwood Front Doors

Dense hardwood entrance doors built for security and long service life.

from £1,850 per door

See hardwood front doors →

Accoya Front Doors

Modified timber that barely moves — the specification for exposed and coastal sites.

from £2,600 per door

See accoya front doors →

Painted Timber Doors

Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.

from £1,450 per door

See painted timber doors →

Bespoke Timber Doors

One-off doors drawn from scratch — non-standard sizes, arches and glazing.

from £2,200 per door

See bespoke timber doors →

Common questions

Does sea air really affect a timber door?

Yes, in two ways. Salt is hygroscopic so it holds moisture against the surface, and airborne chloride corrodes standard ironmongery quickly. Both are solvable at specification stage.

Which ironmongery survives salt air?

Grade A4 (marine) stainless steel. Standard A2 stainless and lacquered brass both fail within a few years within about a mile of open water.

What door suits a Victorian terrace?

A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.

What finish options are there?

Factory spray in any RAL or heritage colour, translucent stains, and natural oils on oak. All applied and cured in controlled conditions before the door ships.

Do you remove the old door?

Yes, and we take it away. If the frame is sound we can hang into it; if it has rotted at the foot we will say so at survey rather than after.

Can you supply just the door leaf?

Yes, if the existing frame is sound and correctly sized. We will check it at survey — hanging a new leaf in a failed frame wastes the door.