Timber Front Doors
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →Twenty-four door types across four families. Guide prices are supplied and fitted with VAT included. Lead times run from one week for a repair to twelve for a bi-fold set.
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →Solid European oak entrance doors with a natural oiled or stained finish.
from £2,400 per door
See oak front doors →Dense hardwood entrance doors built for security and long service life.
from £1,850 per door
See hardwood front doors →Modified timber that barely moves — the specification for exposed and coastal sites.
from £2,600 per door
See accoya front doors →Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.
from £1,450 per door
See painted timber doors →One-off doors drawn from scratch — non-standard sizes, arches and glazing.
from £2,200 per door
See bespoke timber doors →Rear and side doors built to the same weather spec as the front.
from £1,100 per door
See timber back doors →Split-leaf doors with a weathered centre rail and independent bolts.
from £1,600 per door
See timber stable doors →Matched pairs with a rebated meeting stile and flush shootbolts.
from £2,800 per pair
See timber french doors →Folding timber sets on a top-hung track, three to seven panels.
from £5,400 per set
See timber bi-fold doors →Lift-and-slide timber patio doors with slim sightlines.
from £4,200 per set
See timber sliding patio doors →Wide double entrances with a fixed slave leaf or two working leaves.
from £3,200 per pair
See timber double doors →Four-panel doors with correct stiles, bolection mouldings and etched glass.
from £1,650 per door
See victorian timber doors →Three-panel doors with a deep upper light and simplified mouldings.
from £1,650 per door
See edwardian timber doors →Six-panel doors with raised and fielded panels and a fanlight above.
from £1,900 per door
See georgian timber doors →Ledged, braced and boarded doors for stone and rendered cottages.
from £1,250 per door
See cottage timber doors →Doors drawn to satisfy conservation officers, with drawings for planning.
from £1,950 per door
See conservation area doors →Stripping, splicing, re-hanging and refinishing doors worth keeping.
from £780 per door
See timber door restoration →Room doors hung, trimmed and ironmongery fitted throughout the house.
from £420 per door
See internal timber doors →Solid and veneered oak internal doors, pre-finished or site-oiled.
from £560 per door
See oak internal doors →FD30 and FD60 doorsets supplied certified with intumescent seals.
from £690 per door
See timber fire doors →Side-hung, up-and-over and barn-style garage doors in cedar or idigbo.
from £2,900 per set
See timber garage doors →New frames, linings and cills cut to the opening you actually have.
from £480 per frame
See timber door frames →Dropped hinges, sticking leaves, rot in the bottom rail — repaired not replaced.
from £320 per visit
See timber door repairs →We give an indicative price from sizes or photographs, then survey free of charge before anything is made. The survey is what turns an estimate into a fixed price.
Engineered redwood for painted doors, dense hardwoods such as sapele or idigbo where more strength is wanted, European oak where the grain is the point, and Accoya on exposed and coastal openings.
Yes. We take the mouldings, panel proportions and glazing pattern from the original and reproduce them. If the door is beyond saving we can still copy it before it goes.
A well-built timber door with a multipoint lock and reinforced keeps is at least as secure as a composite equivalent. The lock and the frame fixings matter more than the leaf material.
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.