Timber Front Doors
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →
Made to measure · UK-wide
Timber doors, cut to the opening you actually have
Every door is surveyed on site, machined from timber chosen for its exposure, and spray-finished in the workshop before it is hung. No nearest-standard sizes shaved to fit.
- Free measured survey before anything is made
- Engineered redwood, hardwood, oak and Accoya
- Factory-sprayed and cured on all six faces
- Ten-year guarantee on joinery and finish
Get a fixed price
Tell us the opening. We will come back with a range, then survey free of charge.
10-year guarantee
Free measured survey
Responsibly sourced timber
Nationwide installation
Fixed price, no surprises
Why timber
Measured, not assumed
Every door is surveyed on site and cut to the opening you actually have — not a nearest-standard size shaved to fit.
Timber chosen for the job
Engineered redwood, dense hardwood, European oak or modified Accoya, specified against the exposure your door will face.
Finished before it ships
Doors are sprayed and cured in the workshop, so the finish is even and the door is protected from the day it is hung.
Guaranteed for ten years
Cover on the joinery and the factory finish, with a survey record kept so any claim is straightforward.
Shop by door type
Twenty-four door types, all made to order. Guide prices are supplied and fitted, and a free survey turns them into a fixed price.
Entrance doors
Oak Front Doors
Solid European oak entrance doors with a natural oiled or stained finish.
from £2,400 per door
See oak front doors →Hardwood Front Doors
Dense hardwood entrance doors built for security and long service life.
from £1,850 per door
See hardwood front doors →Accoya Front Doors
Modified timber that barely moves — the specification for exposed and coastal sites.
from £2,600 per door
See accoya front doors →Painted Timber Doors
Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.
from £1,450 per door
See painted timber doors →Bespoke Timber Doors
One-off doors drawn from scratch — non-standard sizes, arches and glazing.
from £2,200 per door
See bespoke timber doors →Garden & rear doors
Timber Back Doors
Rear and side doors built to the same weather spec as the front.
from £1,100 per door
See timber back doors →Timber Stable Doors
Split-leaf doors with a weathered centre rail and independent bolts.
from £1,600 per door
See timber stable doors →Timber French Doors
Matched pairs with a rebated meeting stile and flush shootbolts.
from £2,800 per pair
See timber french doors →Timber Bi-Fold Doors
Folding timber sets on a top-hung track, three to seven panels.
from £5,400 per set
See timber bi-fold doors →Timber Sliding Patio Doors
Lift-and-slide timber patio doors with slim sightlines.
from £4,200 per set
See timber sliding patio doors →Timber Double Doors
Wide double entrances with a fixed slave leaf or two working leaves.
from £3,200 per pair
See timber double doors →Period & heritage
Victorian Timber Doors
Four-panel doors with correct stiles, bolection mouldings and etched glass.
from £1,650 per door
See victorian timber doors →Edwardian Timber Doors
Three-panel doors with a deep upper light and simplified mouldings.
from £1,650 per door
See edwardian timber doors →Georgian Timber Doors
Six-panel doors with raised and fielded panels and a fanlight above.
from £1,900 per door
See georgian timber doors →Cottage Timber Doors
Ledged, braced and boarded doors for stone and rendered cottages.
from £1,250 per door
See cottage timber doors →Conservation Area Doors
Doors drawn to satisfy conservation officers, with drawings for planning.
from £1,950 per door
See conservation area doors →Timber Door Restoration
Stripping, splicing, re-hanging and refinishing doors worth keeping.
from £780 per door
See timber door restoration →Internal & specialist
Internal Timber Doors
Room doors hung, trimmed and ironmongery fitted throughout the house.
from £420 per door
See internal timber doors →Oak Internal Doors
Solid and veneered oak internal doors, pre-finished or site-oiled.
from £560 per door
See oak internal doors →Timber Fire Doors
FD30 and FD60 doorsets supplied certified with intumescent seals.
from £690 per door
See timber fire doors →Timber Garage Doors
Side-hung, up-and-over and barn-style garage doors in cedar or idigbo.
from £2,900 per set
See timber garage doors →Timber Door Frames
New frames, linings and cills cut to the opening you actually have.
from £480 per frame
See timber door frames →Timber Door Repairs
Dropped hinges, sticking leaves, rot in the bottom rail — repaired not replaced.
from £320 per visit
See timber door repairs →What happens next
Four steps from first message to a door that closes properly on a cold morning.
Tell us the opening
Send sizes, a photo or just the address. A rough idea is enough to price the job.
Free measured survey
We measure the structural opening, check the cill and reveal, and confirm the specification.
Made and finished
Your door is machined, assembled and spray-finished, then cured before it leaves the workshop.
Fitted and adjusted
Hung, ironmongery set, weatherseals checked and the door left closing properly on a cold morning.
What customers say
★★★★★
What customers say about the survey, the finish and the fit.
“Second door we've had from them. Same standard as the first, which is really the whole point.”
— Homeowner, UK“Quoted, surveyed and fitted without any of it turning into a saga. The finish is far better than the sprayed doors we looked at in a showroom.”
— Homeowner, UK“Straight answer on price, no pressure, and the fitters left the place clean. The door itself is genuinely lovely.”
— Homeowner, UKCommon questions
Can you fit a cat flap or letter plate?
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
How do you handle out-of-hours or emergency repairs?
Making a door secure and weathertight is usually possible quickly; the permanent repair follows once parts are available.
Do you offer trade supply?
Yes, for builders and joiners working to their own programme. Trade orders still go through the same survey and quality checks.
How do you price glazing?
By area and specification. Obscure and etched glass costs more than clear; leaded and stained panels are priced per panel once the pattern is agreed.
What is the difference between a door and a doorset?
A doorset is the leaf, frame, seals and ironmongery supplied together and pre-hung. It fits faster and performs more predictably than parts assembled on site.
Do you handle planning applications?
We do not submit on your behalf, but we produce the elevational drawings, sections and specification that conservation and planning officers ask for.
What about draughts around the frame?
Compression seals in the rebate handle the leaf; the gap between frame and structure is a separate job, insulated and sealed on fitting rather than filled with expanding foam alone.
Do you fit in winter?
Yes. Clearances are set for the season and the finish is already cured, so there is no waiting for weather to paint on site.
Where we work
We survey, make and fit across England, Wales and Scotland. Pick a county to see local specification notes.
BedfordshireBerkshireBristolBuckinghamshireCambridgeshireCheshireCornwallCounty DurhamCumbriaDerbyshireDevonDorsetEast Riding of YorkshireEast SussexEssexGloucestershireGreater ManchesterHampshireHerefordshireHertfordshireIsle of WightKentLancashireLeicestershireLincolnshireLondonMerseysideNorfolkNorth YorkshireNorthamptonshireNorthumberlandNottinghamshireOxfordshireRutlandShropshireSomersetSouth YorkshireStaffordshireSuffolkSurreyTyne and WearWarwickshireWest MidlandsWest SussexWest YorkshireWiltshireWorcestershireAngleseyBridgendCardiffCarmarthenshireCeredigionConwyDenbighshireFlintshireGwyneddMonmouthshireNeath Port TalbotPembrokeshirePowysSwanseaWrexhamAberdeenshireAngusAyrshireDumfries and GallowayEdinburghFifeGlasgowHighlandLanarkshirePerth and KinrossScottish BordersStirlingshire
Get a fixed price for your postcode
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.