Timber Front Doors
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →Scotland
We survey, make and fit made-to-measure timber doors throughout Edinburgh, covering 6 towns from the workshop to the fitted door.
Coastal openings. Leith, Portobello, Musselburgh sit close enough to open water that salt-laden air drives the specification: Accoya or dense hardwood, a high-build microporous coating and grade A4 marine stainless ironmongery.
Conservation areas. Edinburgh carry designated conservation areas or listed frontages. Like-for-like timber replacement is rarely refused; changing material or glazing pattern usually is. We produce drawings for consent applications.
All twenty-four types are available here, supplied and fitted with a ten-year guarantee.
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →Solid European oak entrance doors with a natural oiled or stained finish.
from £2,400 per door
See oak front doors →Dense hardwood entrance doors built for security and long service life.
from £1,850 per door
See hardwood front doors →Modified timber that barely moves — the specification for exposed and coastal sites.
from £2,600 per door
See accoya front doors →Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.
from £1,450 per door
See painted timber doors →One-off doors drawn from scratch — non-standard sizes, arches and glazing.
from £2,200 per door
See bespoke timber doors →Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Six raised-and-fielded panels under a fanlight, in a painted finish. Proportion is everything: the panels step in size up the door rather than repeating equally.
Timber and finish samples are available so you can see the colour on the actual species in your own light, which rarely matches a printed chart.
Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Each town page carries its own exposure, housing character and planning notes.
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.