North West England

Timber doors in Merseyside

We survey, make and fit made-to-measure timber doors throughout Merseyside, covering 11 towns from the workshop to the fitted door.

Coastal openings. Birkenhead, Southport, Wallasey, Crosby, Formby, Heswall and others sit close enough to open water that salt-laden air drives the specification: Accoya or dense hardwood, a high-build microporous coating and grade A4 marine stainless ironmongery.

Door types we make for Merseyside

All twenty-four types are available here, supplied and fitted with a ten-year guarantee.

Timber Front Doors

Made-to-measure front doors in engineered or solid timber, factory finished.

from £1,350 per door

See timber front doors →

Oak Front Doors

Solid European oak entrance doors with a natural oiled or stained finish.

from £2,400 per door

See oak front doors →

Hardwood Front Doors

Dense hardwood entrance doors built for security and long service life.

from £1,850 per door

See hardwood front doors →

Accoya Front Doors

Modified timber that barely moves — the specification for exposed and coastal sites.

from £2,600 per door

See accoya front doors →

Painted Timber Doors

Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.

from £1,450 per door

See painted timber doors →

Bespoke Timber Doors

One-off doors drawn from scratch — non-standard sizes, arches and glazing.

from £2,200 per door

See bespoke timber doors →

Common questions

What door suits a Victorian terrace?

A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.

How wide can a single door be?

Around 1,100mm for a standard leaf before the weight starts to work against the hinges. Beyond that a pair or a leaf-and-a-half arrangement is the sensible answer.

Can I see a sample before ordering?

Timber and finish samples are available so you can see the colour on the actual species in your own light, which rarely matches a printed chart.

What if I only want a repair?

Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.

How long does a made-to-measure timber door take?

Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.

Will a timber door swell and stick?

Timber moves with humidity, which is why clearances, sealed end grain and a breathable finish matter. A door made to the correct moisture content and finished on all six faces stays workable through the seasons.