Wales

Timber doors in Neath Port Talbot

We survey, make and fit made-to-measure timber doors throughout Neath Port Talbot, covering 4 towns from the workshop to the fitted door.

Coastal openings. Neath, Port Talbot, Briton Ferry sit close enough to open water that salt-laden air drives the specification: Accoya or dense hardwood, a high-build microporous coating and grade A4 marine stainless ironmongery.

Door types we make for Neath Port Talbot

All twenty-four types are available here, supplied and fitted with a ten-year guarantee.

Timber Front Doors

Made-to-measure front doors in engineered or solid timber, factory finished.

from £1,350 per door

See timber front doors →

Oak Front Doors

Solid European oak entrance doors with a natural oiled or stained finish.

from £2,400 per door

See oak front doors →

Hardwood Front Doors

Dense hardwood entrance doors built for security and long service life.

from £1,850 per door

See hardwood front doors →

Accoya Front Doors

Modified timber that barely moves — the specification for exposed and coastal sites.

from £2,600 per door

See accoya front doors →

Painted Timber Doors

Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.

from £1,450 per door

See painted timber doors →

Bespoke Timber Doors

One-off doors drawn from scratch — non-standard sizes, arches and glazing.

from £2,200 per door

See bespoke timber doors →

Common questions

Does sea air really affect a timber door?

Yes, in two ways. Salt is hygroscopic so it holds moisture against the surface, and airborne chloride corrodes standard ironmongery quickly. Both are solvable at specification stage.

Which ironmongery survives salt air?

Grade A4 (marine) stainless steel. Standard A2 stainless and lacquered brass both fail within a few years within about a mile of open water.

What door suits a stone cottage?

A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.

Can I see a sample before ordering?

Timber and finish samples are available so you can see the colour on the actual species in your own light, which rarely matches a printed chart.

What if I only want a repair?

Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.

How long does a made-to-measure timber door take?

Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.