East of England
Timber Door Restoration in Norfolk
If you are replacing a door in Norfolk, Timber Door Restoration are cut to your actual opening rather than to a nearest standard size.
4 of the 12 towns we cover in Norfolk are coastal, where Accoya or dense hardwood and marine-grade stainless ironmongery are the sensible specification, and 5 carry designated conservation areas where the glazing pattern and mouldings need to match what is already there.
Most door problems are not the door. They are an opening that has moved, a cill that sheds water backwards, or a finish that was never cured properly. A survey is what separates a door that works from one you fight with.
Price and lead time in Norfolk
Timber Door Restoration start at £780 per door supplied and fitted, VAT included, with a typical lead time of 3–5 weeks. Try the indicative price tool for a range, or send sizes and we will be closer.
Common questions
When is a door worth restoring?
If the stiles and panels are sound, restoration is nearly always cheaper and better than replacement. Rot confined to the bottom rail or the foot of a stile can be spliced out.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a 1930s semi?
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Will a timber door swell and stick?
Timber moves with humidity, which is why clearances, sealed end grain and a breathable finish matter. A door made to the correct moisture content and finished on all six faces stays workable through the seasons.
Timber Door Restoration town by town
Specification changes with exposure and housing character — each town page says how.
Other doors in Norfolk
Get a fixed price for Norfolk
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.