Timber Front Doors
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →North East England
We survey, make and fit made-to-measure timber doors throughout Northumberland, covering 10 towns from the workshop to the fitted door.
Coastal openings. Alnwick, Berwick-upon-Tweed, Ashington, Blyth, Amble sit close enough to open water that salt-laden air drives the specification: Accoya or dense hardwood, a high-build microporous coating and grade A4 marine stainless ironmongery.
Conservation areas. Alnwick, Hexham, Morpeth, Berwick-upon-Tweed, Corbridge carry designated conservation areas or listed frontages. Like-for-like timber replacement is rarely refused; changing material or glazing pattern usually is. We produce drawings for consent applications.
All twenty-four types are available here, supplied and fitted with a ten-year guarantee.
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →Solid European oak entrance doors with a natural oiled or stained finish.
from £2,400 per door
See oak front doors →Dense hardwood entrance doors built for security and long service life.
from £1,850 per door
See hardwood front doors →Modified timber that barely moves — the specification for exposed and coastal sites.
from £2,600 per door
See accoya front doors →Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.
from £1,450 per door
See painted timber doors →One-off doors drawn from scratch — non-standard sizes, arches and glazing.
from £2,200 per door
See bespoke timber doors →Yes, in two ways. Salt is hygroscopic so it holds moisture against the surface, and airborne chloride corrodes standard ironmongery quickly. Both are solvable at specification stage.
Grade A4 (marine) stainless steel. Standard A2 stainless and lacquered brass both fail within a few years within about a mile of open water.
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Regularly. Listed building consent is a separate process from planning, and we can supply the drawings and specification your application needs.
Each town page carries its own exposure, housing character and planning notes.
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.