Scotland

Timber doors in Perth and Kinross

We survey, make and fit made-to-measure timber doors throughout Perth and Kinross, covering 7 towns from the workshop to the fitted door.

Conservation areas. Perth, Crieff, Pitlochry, Aberfeldy, Auchterarder carry designated conservation areas or listed frontages. Like-for-like timber replacement is rarely refused; changing material or glazing pattern usually is. We produce drawings for consent applications.

Door types we make for Perth and Kinross

All twenty-four types are available here, supplied and fitted with a ten-year guarantee.

Timber Front Doors

Made-to-measure front doors in engineered or solid timber, factory finished.

from £1,350 per door

See timber front doors →

Oak Front Doors

Solid European oak entrance doors with a natural oiled or stained finish.

from £2,400 per door

See oak front doors →

Hardwood Front Doors

Dense hardwood entrance doors built for security and long service life.

from £1,850 per door

See hardwood front doors →

Accoya Front Doors

Modified timber that barely moves — the specification for exposed and coastal sites.

from £2,600 per door

See accoya front doors →

Painted Timber Doors

Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.

from £1,450 per door

See painted timber doors →

Bespoke Timber Doors

One-off doors drawn from scratch — non-standard sizes, arches and glazing.

from £2,200 per door

See bespoke timber doors →

Common questions

Can modern sealed units go in a heritage door?

Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.

Do I need permission to change a door in a conservation area?

Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.

What door suits a Georgian townhouse?

Six raised-and-fielded panels under a fanlight, in a painted finish. Proportion is everything: the panels step in size up the door rather than repeating equally.

Do you remove the old door?

Yes, and we take it away. If the frame is sound we can hang into it; if it has rotted at the foot we will say so at survey rather than after.

Can you supply just the door leaf?

Yes, if the existing frame is sound and correctly sized. We will check it at survey — hanging a new leaf in a failed frame wastes the door.

How much does a timber door cost?

Guide prices start from the figures shown on each product page, supplied and fitted. The variables are size, timber, glazing and ironmongery, and the survey fixes the number.