West Midlands
Internal Timber Doors in Shropshire
If you are replacing a door in Shropshire, Internal Timber Doors are cut to your actual opening rather than to a nearest standard size.
1 of the 10 towns we cover in Shropshire are coastal, where Accoya or dense hardwood and marine-grade stainless ironmongery are the sensible specification, and 4 carry designated conservation areas where the glazing pattern and mouldings need to match what is already there.
Timber moves. The trick is not to stop it but to allow for it — correct moisture content at the workshop, sealed end grain, a finish that lets vapour out and keeps water off, and clearances set for the season you fit in.
Price and lead time in Shropshire
Internal Timber Doors start at £420 per door supplied and fitted, VAT included, with a typical lead time of 3–5 weeks. Try the indicative price tool for a range, or send sizes and we will be closer.
Common questions
Do internal doors need to be the same throughout?
Consistency reads well, but the practical requirement is consistent height and ironmongery. Mixing styles between floors is common in older houses and looks intentional.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Is timber a sustainable choice?
Responsibly sourced timber is the only mainstream door material that stores carbon rather than emitting it in manufacture, and a timber door can be repaired rather than replaced.
Can you work to an architect's specification?
Yes. Send the drawings and schedule and we will price against them, flagging anything that will not perform as drawn.
Internal Timber Doors town by town
Specification changes with exposure and housing character — each town page says how.
Other doors in Shropshire
Get a fixed price for Shropshire
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.