East of England

Timber doors in Suffolk

We survey, make and fit made-to-measure timber doors throughout Suffolk, covering 12 towns from the workshop to the fitted door.

Coastal openings. Lowestoft, Felixstowe, Aldeburgh, Southwold sit close enough to open water that salt-laden air drives the specification: Accoya or dense hardwood, a high-build microporous coating and grade A4 marine stainless ironmongery.

Conservation areas. Ipswich, Bury St Edmunds, Sudbury, Woodbridge, Aldeburgh, Southwold among others carry designated conservation areas or listed frontages. Like-for-like timber replacement is rarely refused; changing material or glazing pattern usually is. We produce drawings for consent applications.

Door types we make for Suffolk

All twenty-four types are available here, supplied and fitted with a ten-year guarantee.

Timber Front Doors

Made-to-measure front doors in engineered or solid timber, factory finished.

from £1,350 per door

See timber front doors →

Oak Front Doors

Solid European oak entrance doors with a natural oiled or stained finish.

from £2,400 per door

See oak front doors →

Hardwood Front Doors

Dense hardwood entrance doors built for security and long service life.

from £1,850 per door

See hardwood front doors →

Accoya Front Doors

Modified timber that barely moves — the specification for exposed and coastal sites.

from £2,600 per door

See accoya front doors →

Painted Timber Doors

Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.

from £1,450 per door

See painted timber doors →

Bespoke Timber Doors

One-off doors drawn from scratch — non-standard sizes, arches and glazing.

from £2,200 per door

See bespoke timber doors →

Common questions

Can modern sealed units go in a heritage door?

Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.

Do I need permission to change a door in a conservation area?

Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.

What door suits a 1930s semi?

A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.

How wide can a single door be?

Around 1,100mm for a standard leaf before the weight starts to work against the hinges. Beyond that a pair or a leaf-and-a-half arrangement is the sensible answer.

Can I see a sample before ordering?

Timber and finish samples are available so you can see the colour on the actual species in your own light, which rarely matches a printed chart.

What if I only want a repair?

Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.