Timber Front Doors
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →South East England
We survey, make and fit made-to-measure timber doors throughout West Sussex, covering 12 towns from the workshop to the fitted door.
Coastal openings. Chichester, Worthing, Bognor Regis, Littlehampton, Shoreham-by-Sea sit close enough to open water that salt-laden air drives the specification: Accoya or dense hardwood, a high-build microporous coating and grade A4 marine stainless ironmongery.
Conservation areas. Chichester, Arundel, Midhurst carry designated conservation areas or listed frontages. Like-for-like timber replacement is rarely refused; changing material or glazing pattern usually is. We produce drawings for consent applications.
All twenty-four types are available here, supplied and fitted with a ten-year guarantee.
Made-to-measure front doors in engineered or solid timber, factory finished.
from £1,350 per door
See timber front doors →Solid European oak entrance doors with a natural oiled or stained finish.
from £2,400 per door
See oak front doors →Dense hardwood entrance doors built for security and long service life.
from £1,850 per door
See hardwood front doors →Modified timber that barely moves — the specification for exposed and coastal sites.
from £2,600 per door
See accoya front doors →Spray-finished in any RAL or heritage colour, cured before it leaves the workshop.
from £1,450 per door
See painted timber doors →One-off doors drawn from scratch — non-standard sizes, arches and glazing.
from £2,200 per door
See bespoke timber doors →Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
Each town page carries its own exposure, housing character and planning notes.
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.