Timber Door CompanyCrafted in wood. Built to last.

Chipping Campden · Gloucestershire · GL postcodes

Accoya Front Doors in Chipping Campden

Accoya Front Doors made to measure for homes across Chipping Campden, surveyed on site and finished in the workshop before they are hung.

Specifying a door for Chipping Campden

Chipping Campden sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.

Housing in and around Chipping Campden is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.

Exposure
Moderately exposed — GL postcode area
Timber
Engineered redwood or hardwood
Weather detail
a full weatherbar, drip mould and rebated cill
Ironmongery
Stainless or quality plated ironmongery
Recoating
Every five to seven years on the weather elevation

Planning note. Chipping Campden has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Gloucestershire planning before ordering.

Price and lead time in Chipping Campden

Accoya Front Doors start at £2,600 per door supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.

Common questions

What makes Accoya different?

It is softwood modified through acetylation so it barely absorbs moisture. Movement drops dramatically, coatings last far longer, and it carries a long durability warranty.

Can modern sealed units go in a heritage door?

Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.

Do I need permission to change a door in a conservation area?

Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.

What door suits a stone cottage?

A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.

Will the colour fade?

Modern microporous coatings hold colour well, though very dark colours on south-facing elevations work hardest. We will advise if a chosen colour is likely to be a maintenance burden.

Do you work on listed buildings?

Regularly. Listed building consent is a separate process from planning, and we can supply the drawings and specification your application needs.

Nearby

We cover the rest of Gloucestershire too.

10-year guarantee
Free measured survey
Responsibly sourced timber
Nationwide installation
Fixed price, no surprises

Get a fixed price for Chipping Campden

Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.

Call usGet a quote