Frome · Somerset · BA postcodes
Accoya Front Doors in Frome
Accoya Front Doors for Frome properties: a free measured survey, a fixed price, and a door that still closes cleanly in the winter.
Specifying a door for Frome
Frome sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Frome is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — BA postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Frome has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Somerset planning before ordering.
Price and lead time in Frome
Accoya Front Doors start at £2,600 per door supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What makes Accoya different?
It is softwood modified through acetylation so it barely absorbs moisture. Movement drops dramatically, coatings last far longer, and it carries a long durability warranty.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
How do I look after the finish?
Wash the door twice a year with mild soapy water and check the bottom rail and cill for standing water. Recoating intervals depend on exposure and aspect — south and west elevations go first.
What if my opening is not square?
Very few are. The survey records the actual dimensions at several heights and the door is made to suit, with the frame packed and scribed on fitting.
Nearby
We cover the rest of Somerset too.
Get a fixed price for Frome
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.