Selkirk · Scottish Borders · TD postcodes
Accoya Front Doors in Selkirk
Accoya Front Doors made to measure for homes across Selkirk, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Selkirk
Selkirk is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Selkirk is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — TD postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Planning note. Selkirk has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Scottish Borders planning before ordering.
Price and lead time in Selkirk
Accoya Front Doors start at £2,600 per door supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What makes Accoya different?
It is softwood modified through acetylation so it barely absorbs moisture. Movement drops dramatically, coatings last far longer, and it carries a long durability warranty.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Will the colour fade?
Modern microporous coatings hold colour well, though very dark colours on south-facing elevations work hardest. We will advise if a chosen colour is likely to be a maintenance burden.
Do you work on listed buildings?
Regularly. Listed building consent is a separate process from planning, and we can supply the drawings and specification your application needs.
Nearby
We cover the rest of Scottish Borders too.
Get a fixed price for Selkirk
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.