St Ives · Cambridgeshire · PE postcodes
Accoya Front Doors in St Ives
We make and fit Accoya Front Doors throughout St Ives — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for St Ives
St Ives sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around St Ives is largely 1920s–1930s semi-detached stock, which suits three-panel doors with a wide glazed head, often in a sunburst or geometric lead pattern. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — PE postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Planning note. St Ives has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Cambridgeshire planning before ordering.
Price and lead time in St Ives
Accoya Front Doors start at £2,600 per door supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What makes Accoya different?
It is softwood modified through acetylation so it barely absorbs moisture. Movement drops dramatically, coatings last far longer, and it carries a long durability warranty.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a 1930s semi?
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
Nearby
We cover the rest of Cambridgeshire too.
Get a fixed price for St Ives
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.