Builth Wells · Powys · LD postcodes
Bespoke Timber Doors in Builth Wells
If you are replacing a door in Builth Wells, Bespoke Timber Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Builth Wells
Builth Wells is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Builth Wells is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LD postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Builth Wells
Bespoke Timber Doors start at £2,200 per door supplied and fitted, VAT included. Typical lead time is 9–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
How does a bespoke door start?
With the opening and a conversation. We draw the door, agree the mouldings and glazing, and only then cut timber.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What if I only want a repair?
Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Will a timber door swell and stick?
Timber moves with humidity, which is why clearances, sealed end grain and a breathable finish matter. A door made to the correct moisture content and finished on all six faces stays workable through the seasons.
What is engineered timber and why use it?
Engineered stiles are laminated from several sections with the grain alternated, so the door resists twisting far better than a solid section of the same size. Under paint it is the more stable choice.
Nearby
We cover the rest of Powys too.
Get a fixed price for Builth Wells
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.