St Asaph · Denbighshire · LL postcodes
Bespoke Timber Doors in St Asaph
If you are replacing a door in St Asaph, Bespoke Timber Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for St Asaph
St Asaph sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around St Asaph is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — LL postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. St Asaph has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Denbighshire planning before ordering.
Price and lead time in St Asaph
Bespoke Timber Doors start at £2,200 per door supplied and fitted, VAT included. Typical lead time is 9–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
How does a bespoke door start?
With the opening and a conversation. We draw the door, agree the mouldings and glazing, and only then cut timber.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Is timber a sustainable choice?
Responsibly sourced timber is the only mainstream door material that stores carbon rather than emitting it in manufacture, and a timber door can be repaired rather than replaced.
Can you work to an architect's specification?
Yes. Send the drawings and schedule and we will price against them, flagging anything that will not perform as drawn.
Nearby
We cover the rest of Denbighshire too.
Get a fixed price for St Asaph
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.