Melrose · Scottish Borders · TD postcodes
Conservation Area Doors in Melrose
Conservation Area Doors made to measure for homes across Melrose, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Melrose
Melrose sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Melrose is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — TD postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Melrose has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Scottish Borders planning before ordering.
Price and lead time in Melrose
Conservation Area Doors start at £1,950 per door supplied and fitted, VAT included. Typical lead time is 8–11 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Will the council accept a new timber door?
Usually yes, if it matches the original pattern, mouldings and glazing. Refusals almost always follow proposals that change the appearance rather than the material.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What is engineered timber and why use it?
Engineered stiles are laminated from several sections with the grain alternated, so the door resists twisting far better than a solid section of the same size. Under paint it is the more stable choice.
Do you fit as well as supply?
Both. Most customers take supply and fit, which keeps the guarantee in one place. Supply-only is available if you have your own joiner.
Nearby
We cover the rest of Scottish Borders too.
Get a fixed price for Melrose
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.