Bridgwater · Somerset · TA postcodes
Cottage Timber Doors in Bridgwater
We make and fit Cottage Timber Doors throughout Bridgwater — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Bridgwater
Bridgwater sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Bridgwater is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — TA postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Bridgwater
Cottage Timber Doors start at £1,250 per door supplied and fitted, VAT included. Typical lead time is 6–8 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is a ledged and braced door?
Vertical boards held by horizontal ledges with diagonal braces running from the bottom hinge corner upward, which stops the door dropping. The brace must run the right way or it does nothing.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
How do I look after the finish?
Wash the door twice a year with mild soapy water and check the bottom rail and cill for standing water. Recoating intervals depend on exposure and aspect — south and west elevations go first.
Nearby
We cover the rest of Somerset too.
Get a fixed price for Bridgwater
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.