Stratford-upon-Avon · Warwickshire · CV postcodes
Cottage Timber Doors in Stratford-upon-Avon
Cottage Timber Doors made to measure for homes across Stratford-upon-Avon, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Stratford-upon-Avon
Stratford-upon-Avon is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Stratford-upon-Avon is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — CV postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Stratford-upon-Avon has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Warwickshire planning before ordering.
Price and lead time in Stratford-upon-Avon
Cottage Timber Doors start at £1,250 per door supplied and fitted, VAT included. Typical lead time is 6–8 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is a ledged and braced door?
Vertical boards held by horizontal ledges with diagonal braces running from the bottom hinge corner upward, which stops the door dropping. The brace must run the right way or it does nothing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Can a timber door be made wheelchair accessible?
Yes. A low-threshold or ramped cill can be specified without losing the weather seal, and the leaf can be widened where the structural opening allows.
Will the colour fade?
Modern microporous coatings hold colour well, though very dark colours on south-facing elevations work hardest. We will advise if a chosen colour is likely to be a maintenance burden.
Nearby
We cover the rest of Warwickshire too.
Get a fixed price for Stratford-upon-Avon
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.