Greenwich · London · SE postcodes
Edwardian Timber Doors in Greenwich
If you are replacing a door in Greenwich, Edwardian Timber Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Greenwich
Greenwich is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Greenwich is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — SE postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Greenwich has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with London planning before ordering.
Price and lead time in Greenwich
Edwardian Timber Doors start at £1,650 per door supplied and fitted, VAT included. Typical lead time is 7–9 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
How does an Edwardian door differ from a Victorian one?
The mouldings simplify, the top light gets bigger, and glazing becomes decorative — leaded, coloured or etched — where the Victorian door was mostly solid.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Do you work on listed buildings?
Regularly. Listed building consent is a separate process from planning, and we can supply the drawings and specification your application needs.
What happens if the door needs adjusting later?
First-season adjustment is included. Timber settles, buildings move, and a small tweak after a winter is normal rather than a fault.
Nearby
We cover the rest of London too.
Get a fixed price for Greenwich
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.