Beaconsfield · Buckinghamshire · HP postcodes
Georgian Timber Doors in Beaconsfield
Georgian Timber Doors made to measure for homes across Beaconsfield, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Beaconsfield
Beaconsfield is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Beaconsfield is largely 1920s–1930s semi-detached stock, which suits three-panel doors with a wide glazed head, often in a sunburst or geometric lead pattern. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — HP postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Beaconsfield has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Buckinghamshire planning before ordering.
Price and lead time in Beaconsfield
Georgian Timber Doors start at £1,900 per door supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do I need a fanlight?
Not structurally, but the six-panel Georgian door was designed with one. Without it the proportions above the door usually look wrong.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a 1930s semi?
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
Can you supply just the door leaf?
Yes, if the existing frame is sound and correctly sized. We will check it at survey — hanging a new leaf in a failed frame wastes the door.
How much does a timber door cost?
Guide prices start from the figures shown on each product page, supplied and fitted. The variables are size, timber, glazing and ironmongery, and the survey fixes the number.
Nearby
We cover the rest of Buckinghamshire too.
Get a fixed price for Beaconsfield
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.