Connah's Quay · Flintshire · CH postcodes
Georgian Timber Doors in Connah's Quay
If you are replacing a door in Connah's Quay, Georgian Timber Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Connah's Quay
Connah's Quay sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Connah's Quay is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — CH postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Connah's Quay
Georgian Timber Doors start at £1,900 per door supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do I need a fanlight?
Not structurally, but the six-panel Georgian door was designed with one. Without it the proportions above the door usually look wrong.
Which ironmongery survives salt air?
Grade A4 (marine) stainless steel. Standard A2 stainless and lacquered brass both fail within a few years within about a mile of open water.
Does sea air really affect a timber door?
Yes, in two ways. Salt is hygroscopic so it holds moisture against the surface, and airborne chloride corrodes standard ironmongery quickly. Both are solvable at specification stage.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What if I only want a repair?
Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Nearby
We cover the rest of Flintshire too.
Get a fixed price for Connah's Quay
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.