Banchory · Aberdeenshire · AB postcodes
Hardwood Front Doors in Banchory
We make and fit Hardwood Front Doors throughout Banchory — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Banchory
Banchory is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Banchory is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — AB postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Planning note. Banchory has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Aberdeenshire planning before ordering.
Price and lead time in Banchory
Hardwood Front Doors start at £1,850 per door supplied and fitted, VAT included. Typical lead time is 7–9 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Which hardwood is best for a front door?
Sapele and idigbo are the common choices — dense, stable and readily available. Idigbo takes paint particularly well; sapele suits a stained finish.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Do you offer trade supply?
Yes, for builders and joiners working to their own programme. Trade orders still go through the same survey and quality checks.
How do you price glazing?
By area and specification. Obscure and etched glass costs more than clear; leaded and stained panels are priced per panel once the pattern is agreed.
Nearby
We cover the rest of Aberdeenshire too.
Get a fixed price for Banchory
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.