Stratford-upon-Avon · Warwickshire · CV postcodes
Hardwood Front Doors in Stratford-upon-Avon
If you are replacing a door in Stratford-upon-Avon, Hardwood Front Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Stratford-upon-Avon
Stratford-upon-Avon is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Stratford-upon-Avon is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — CV postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Stratford-upon-Avon has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Warwickshire planning before ordering.
Price and lead time in Stratford-upon-Avon
Hardwood Front Doors start at £1,850 per door supplied and fitted, VAT included. Typical lead time is 7–9 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Which hardwood is best for a front door?
Sapele and idigbo are the common choices — dense, stable and readily available. Idigbo takes paint particularly well; sapele suits a stained finish.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Will a timber door swell and stick?
Timber moves with humidity, which is why clearances, sealed end grain and a breathable finish matter. A door made to the correct moisture content and finished on all six faces stays workable through the seasons.
Nearby
We cover the rest of Warwickshire too.
Get a fixed price for Stratford-upon-Avon
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.