Flint · Flintshire · CH postcodes
Oak Front Doors in Flint
If you are replacing a door in Flint, Oak Front Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Flint
Flint sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Flint is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — CH postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Flint
Oak Front Doors start at £2,400 per door supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Does an oak door need oiling or painting?
Oak is normally oiled or left with a UV-stabilised translucent finish so the grain shows. It can be painted, but most people who choose oak want to see it.
Which ironmongery survives salt air?
Grade A4 (marine) stainless steel. Standard A2 stainless and lacquered brass both fail within a few years within about a mile of open water.
Does sea air really affect a timber door?
Yes, in two ways. Salt is hygroscopic so it holds moisture against the surface, and airborne chloride corrodes standard ironmongery quickly. Both are solvable at specification stage.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What happens if the door needs adjusting later?
First-season adjustment is included. Timber settles, buildings move, and a small tweak after a winter is normal rather than a fault.
Can you replace the frame as well as the door?
Yes, and often it is the better answer. A new leaf in a rotten frame will not seal properly however well the door itself is made.
Nearby
We cover the rest of Flintshire too.
Get a fixed price for Flint
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.