Hay-on-Wye · Powys · HR postcodes
Oak Internal Doors in Hay-on-Wye
Our Oak Internal Doors are made to order for Hay-on-Wye, spray-finished and cured before delivery so the door arrives protected.
Specifying a door for Hay-on-Wye
Hay-on-Wye is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Hay-on-Wye is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — HR postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Planning note. Hay-on-Wye has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Powys planning before ordering.
Price and lead time in Hay-on-Wye
Oak Internal Doors start at £560 per door supplied and fitted, VAT included. Typical lead time is 4–6 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Solid oak or oak veneered?
Veneered on an engineered core is more stable and usually the better choice for internal use. Solid oak is heavier, moves more, and costs considerably more.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Can you match an existing door?
Yes. We take the mouldings, panel proportions and glazing pattern from the original and reproduce them. If the door is beyond saving we can still copy it before it goes.
How secure is a timber door?
A well-built timber door with a multipoint lock and reinforced keeps is at least as secure as a composite equivalent. The lock and the frame fixings matter more than the leaf material.
Nearby
We cover the rest of Powys too.
Get a fixed price for Hay-on-Wye
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.