Mold · Flintshire · CH postcodes
Oak Internal Doors in Mold
Oak Internal Doors for Mold properties: a free measured survey, a fixed price, and a door that still closes cleanly in the winter.
Specifying a door for Mold
Mold sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Mold is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — CH postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Mold has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Flintshire planning before ordering.
Price and lead time in Mold
Oak Internal Doors start at £560 per door supplied and fitted, VAT included. Typical lead time is 4–6 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Solid oak or oak veneered?
Veneered on an engineered core is more stable and usually the better choice for internal use. Solid oak is heavier, moves more, and costs considerably more.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
What ironmongery do you supply?
Everything from period butt hinges and rim locks to modern multipoint systems, in finishes from polished brass to satin stainless. Coastal sites get marine-grade stainless as standard.
Can you fit a cat flap or letter plate?
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
Nearby
We cover the rest of Flintshire too.
Get a fixed price for Mold
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.