Gateshead · Tyne and Wear · NE postcodes
Painted Timber Doors in Gateshead
We make and fit Painted Timber Doors throughout Gateshead — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Gateshead
Gateshead sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Gateshead is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — NE postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Price and lead time in Gateshead
Painted Timber Doors start at £1,450 per door supplied and fitted, VAT included. Typical lead time is 6–8 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Is a factory-sprayed finish better than painting on site?
Considerably. Spraying gives an even film thickness on all six faces including the top and bottom edges, and it cures in controlled conditions rather than in whatever weather turns up.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
How do I look after the finish?
Wash the door twice a year with mild soapy water and check the bottom rail and cill for standing water. Recoating intervals depend on exposure and aspect — south and west elevations go first.
What if my opening is not square?
Very few are. The survey records the actual dimensions at several heights and the door is made to suit, with the frame packed and scribed on fitting.
Nearby
We cover the rest of Tyne and Wear too.
Get a fixed price for Gateshead
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.