Dunblane · Stirlingshire · FK postcodes
Timber Back Doors in Dunblane
Our Timber Back Doors are made to order for Dunblane, spray-finished and cured before delivery so the door arrives protected.
Specifying a door for Dunblane
Dunblane is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Dunblane is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — FK postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Planning note. Dunblane has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Stirlingshire planning before ordering.
Price and lead time in Dunblane
Timber Back Doors start at £1,100 per door supplied and fitted, VAT included. Typical lead time is 5–7 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Does a back door need the same specification as the front?
Usually more. Back doors are often on the weather side, get harder use and see wetter conditions from the garden.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
What ironmongery do you supply?
Everything from period butt hinges and rim locks to modern multipoint systems, in finishes from polished brass to satin stainless. Coastal sites get marine-grade stainless as standard.
Can you fit a cat flap or letter plate?
Both, and it is better done in the workshop where the aperture can be sealed properly rather than cut on site.
Nearby
We cover the rest of Stirlingshire too.
Get a fixed price for Dunblane
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.