Raglan · Monmouthshire · NP postcodes
Timber Bi-Fold Doors in Raglan
Homes in Raglan get Timber Bi-Fold Doors built around the opening they have, with the timber and finish specified against local conditions.
Specifying a door for Raglan
Raglan sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Raglan is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — NP postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Raglan has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Monmouthshire planning before ordering.
Price and lead time in Raglan
Timber Bi-Fold Doors start at £5,400 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Can timber bi-folds run smoothly long term?
Yes, on a top-hung track with the weight carried by the head rather than the cill. It keeps the running gear out of the water and the panels aligned.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Can you work to an architect's specification?
Yes. Send the drawings and schedule and we will price against them, flagging anything that will not perform as drawn.
How wide can a single door be?
Around 1,100mm for a standard leaf before the weight starts to work against the hinges. Beyond that a pair or a leaf-and-a-half arrangement is the sensible answer.
Nearby
We cover the rest of Monmouthshire too.
Get a fixed price for Raglan
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.