Llanrwst · Conwy · LL postcodes
Timber Door Frames in Llanrwst
Timber Door Frames made to measure for homes across Llanrwst, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Llanrwst
Llanrwst is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Llanrwst is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LL postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Llanrwst
Timber Door Frames start at £480 per frame supplied and fitted, VAT included. Typical lead time is 4–6 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Should I replace the frame with the door?
If the frame has softened at the foot or the cill is shedding water inwards, yes. A new leaf will not fix a frame that has failed.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
How energy efficient is a timber door?
A modern insulated timber door with a sealed unit performs comparably to composite alternatives, and timber itself is a far poorer conductor than aluminium or steel.
What finish options are there?
Factory spray in any RAL or heritage colour, translucent stains, and natural oils on oak. All applied and cured in controlled conditions before the door ships.
Do you remove the old door?
Yes, and we take it away. If the frame is sound we can hang into it; if it has rotted at the foot we will say so at survey rather than after.
Can you supply just the door leaf?
Yes, if the existing frame is sound and correctly sized. We will check it at survey — hanging a new leaf in a failed frame wastes the door.
Nearby
We cover the rest of Conwy too.
Get a fixed price for Llanrwst
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.