Windermere · Cumbria · LA postcodes
Timber Door Frames in Windermere
Our Timber Door Frames are made to order for Windermere, spray-finished and cured before delivery so the door arrives protected.
Specifying a door for Windermere
Windermere is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Windermere is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LA postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Planning note. Windermere has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Cumbria planning before ordering.
Price and lead time in Windermere
Timber Door Frames start at £480 per frame supplied and fitted, VAT included. Typical lead time is 4–6 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Should I replace the frame with the door?
If the frame has softened at the foot or the cill is shedding water inwards, yes. A new leaf will not fix a frame that has failed.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
How do you price glazing?
By area and specification. Obscure and etched glass costs more than clear; leaded and stained panels are priced per panel once the pattern is agreed.
What is the difference between a door and a doorset?
A doorset is the leaf, frame, seals and ironmongery supplied together and pre-hung. It fits faster and performs more predictably than parts assembled on site.
Nearby
We cover the rest of Cumbria too.
Get a fixed price for Windermere
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.