Cromer · Norfolk · NR postcodes
Timber Door Repairs in Cromer
Timber Door Repairs made to measure for homes across Cromer, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Cromer
Cromer sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Cromer is largely 1920s–1930s semi-detached stock, which suits three-panel doors with a wide glazed head, often in a sunburst or geometric lead pattern. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — NR postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Cromer
Timber Door Repairs start at £320 per visit supplied and fitted, VAT included. Typical lead time is 1–3 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Can rot be repaired or must the door be replaced?
Localised rot is cut out and spliced with matching timber, which is standard joinery practice. If it has reached the joints and the door is racking, replacement is the honest answer.
Which ironmongery survives salt air?
Grade A4 (marine) stainless steel. Standard A2 stainless and lacquered brass both fail within a few years within about a mile of open water.
Does sea air really affect a timber door?
Yes, in two ways. Salt is hygroscopic so it holds moisture against the surface, and airborne chloride corrodes standard ironmongery quickly. Both are solvable at specification stage.
What door suits a 1930s semi?
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
Do you remove the old door?
Yes, and we take it away. If the frame is sound we can hang into it; if it has rotted at the foot we will say so at survey rather than after.
Can you supply just the door leaf?
Yes, if the existing frame is sound and correctly sized. We will check it at survey — hanging a new leaf in a failed frame wastes the door.
Nearby
We cover the rest of Norfolk too.
Get a fixed price for Cromer
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.