Roath · Cardiff · CF postcodes
Timber Door Repairs in Roath
Timber Door Repairs for Roath properties: a free measured survey, a fixed price, and a door that still closes cleanly in the winter.
Specifying a door for Roath
Roath sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Roath is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — CF postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Price and lead time in Roath
Timber Door Repairs start at £320 per visit supplied and fitted, VAT included. Typical lead time is 1–3 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Can rot be repaired or must the door be replaced?
Localised rot is cut out and spliced with matching timber, which is standard joinery practice. If it has reached the joints and the door is racking, replacement is the honest answer.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
How do I get an indicative price quickly?
Use the guide-price tool, or send sizes and a photograph. Either gives a realistic range within a working day.
Do you survey before quoting?
We give an indicative price from sizes or photographs, then survey free of charge before anything is made. The survey is what turns an estimate into a fixed price.
What timber do you use?
Engineered redwood for painted doors, dense hardwoods such as sapele or idigbo where more strength is wanted, European oak where the grain is the point, and Accoya on exposed and coastal openings.
Can you match an existing door?
Yes. We take the mouldings, panel proportions and glazing pattern from the original and reproduce them. If the door is beyond saving we can still copy it before it goes.
Nearby
We cover the rest of Cardiff too.
Get a fixed price for Roath
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.