Llandrindod Wells · Powys · LD postcodes
Timber Door Restoration in Llandrindod Wells
We make and fit Timber Door Restoration throughout Llandrindod Wells — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Llandrindod Wells
Llandrindod Wells is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Llandrindod Wells is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LD postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Llandrindod Wells
Timber Door Restoration start at £780 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
When is a door worth restoring?
If the stiles and panels are sound, restoration is nearly always cheaper and better than replacement. Rot confined to the bottom rail or the foot of a stile can be spliced out.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
How do I look after the finish?
Wash the door twice a year with mild soapy water and check the bottom rail and cill for standing water. Recoating intervals depend on exposure and aspect — south and west elevations go first.
What if my opening is not square?
Very few are. The survey records the actual dimensions at several heights and the door is made to suit, with the frame packed and scribed on fitting.
Nearby
We cover the rest of Powys too.
Get a fixed price for Llandrindod Wells
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.