Whitehaven · Cumbria · CA postcodes
Timber Door Restoration in Whitehaven
Our Timber Door Restoration are made to order for Whitehaven, spray-finished and cured before delivery so the door arrives protected.
Specifying a door for Whitehaven
Whitehaven sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Whitehaven is largely Georgian and Regency townhouse stock, which suits six-panel raised-and-fielded doors set under a radial fanlight. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — CA postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Whitehaven
Timber Door Restoration start at £780 per door supplied and fitted, VAT included. Typical lead time is 3–5 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
When is a door worth restoring?
If the stiles and panels are sound, restoration is nearly always cheaper and better than replacement. Rot confined to the bottom rail or the foot of a stile can be spliced out.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What door suits a Georgian townhouse?
Six raised-and-fielded panels under a fanlight, in a painted finish. Proportion is everything: the panels step in size up the door rather than repeating equally.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
Nearby
We cover the rest of Cumbria too.
Get a fixed price for Whitehaven
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.