Henley-on-Thames · Oxfordshire · RG postcodes
Timber Double Doors in Henley-on-Thames
If you are replacing a door in Henley-on-Thames, Timber Double Doors are cut to your actual opening rather than to a nearest standard size.
Specifying a door for Henley-on-Thames
Henley-on-Thames is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Henley-on-Thames is largely 1920s–1930s semi-detached stock, which suits three-panel doors with a wide glazed head, often in a sunburst or geometric lead pattern. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — RG postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Henley-on-Thames has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Oxfordshire planning before ordering.
Price and lead time in Henley-on-Thames
Timber Double Doors start at £3,200 per pair supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do both leaves need to open?
Not necessarily. A fixed slave leaf with flush bolts is more weathertight and cheaper; make both leaves working only if you will actually use the full width.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a 1930s semi?
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
Will the colour fade?
Modern microporous coatings hold colour well, though very dark colours on south-facing elevations work hardest. We will advise if a chosen colour is likely to be a maintenance burden.
Do you work on listed buildings?
Regularly. Listed building consent is a separate process from planning, and we can supply the drawings and specification your application needs.
Nearby
We cover the rest of Oxfordshire too.
Get a fixed price for Henley-on-Thames
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.