Colwyn Bay · Conwy · LL postcodes
Timber Fire Doors in Colwyn Bay
Homes in Colwyn Bay get Timber Fire Doors built around the opening they have, with the timber and finish specified against local conditions.
Specifying a door for Colwyn Bay
Colwyn Bay sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Colwyn Bay is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LL postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Colwyn Bay
Timber Fire Doors start at £690 per door supplied and fitted, VAT included. Typical lead time is 4–6 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What does FD30 actually mean?
The doorset resists fire for 30 minutes when tested as a complete assembly. The rating belongs to the doorset — leaf, frame, seals and ironmongery — not the leaf alone.
Does sea air really affect a timber door?
Yes, in two ways. Salt is hygroscopic so it holds moisture against the surface, and airborne chloride corrodes standard ironmongery quickly. Both are solvable at specification stage.
Which ironmongery survives salt air?
Grade A4 (marine) stainless steel. Standard A2 stainless and lacquered brass both fail within a few years within about a mile of open water.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Will a timber door swell and stick?
Timber moves with humidity, which is why clearances, sealed end grain and a breathable finish matter. A door made to the correct moisture content and finished on all six faces stays workable through the seasons.
Nearby
We cover the rest of Conwy too.
Get a fixed price for Colwyn Bay
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.