Launceston · Cornwall · PL postcodes
Timber Fire Doors in Launceston
Homes in Launceston get Timber Fire Doors built around the opening they have, with the timber and finish specified against local conditions.
Specifying a door for Launceston
Launceston sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Launceston is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — PL postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Launceston has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Cornwall planning before ordering.
Price and lead time in Launceston
Timber Fire Doors start at £690 per door supplied and fitted, VAT included. Typical lead time is 4–6 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What does FD30 actually mean?
The doorset resists fire for 30 minutes when tested as a complete assembly. The rating belongs to the doorset — leaf, frame, seals and ironmongery — not the leaf alone.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Do you work on listed buildings?
Regularly. Listed building consent is a separate process from planning, and we can supply the drawings and specification your application needs.
What happens if the door needs adjusting later?
First-season adjustment is included. Timber settles, buildings move, and a small tweak after a winter is normal rather than a fault.
Nearby
We cover the rest of Cornwall too.
Get a fixed price for Launceston
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.