Chirk · Wrexham · LL postcodes
Timber French Doors in Chirk
Timber French Doors made to measure for homes across Chirk, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Chirk
Chirk is an exposed inland location, taking wind-driven rain off higher ground. The load on a door here is water forced against the joints rather than salt, so the priority is shedding water away from the bottom rail and keeping the coating film intact.
Housing in and around Chirk is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — LL postcode area
- Timber
- Accoya or engineered redwood with a high-build coating
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Stainless or hot-dip galvanised fixings
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Chirk
Timber French Doors start at £2,800 per pair supplied and fitted, VAT included. Typical lead time is 8–10 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
How do French doors stay weathertight?
Through a rebated meeting stile, compression seals on both leaves and a shootbolt set that pulls the slave leaf into the frame at head and cill.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Will a timber door swell and stick?
Timber moves with humidity, which is why clearances, sealed end grain and a breathable finish matter. A door made to the correct moisture content and finished on all six faces stays workable through the seasons.
What is engineered timber and why use it?
Engineered stiles are laminated from several sections with the grain alternated, so the door resists twisting far better than a solid section of the same size. Under paint it is the more stable choice.
Do you fit as well as supply?
Both. Most customers take supply and fit, which keeps the guarantee in one place. Supply-only is available if you have your own joiner.
Nearby
We cover the rest of Wrexham too.
Get a fixed price for Chirk
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.