Richmond · London · TW postcodes
Timber Front Doors in Richmond
Homes in Richmond get Timber Front Doors built around the opening they have, with the timber and finish specified against local conditions.
Specifying a door for Richmond
Richmond is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Richmond is largely Georgian and Regency townhouse stock, which suits six-panel raised-and-fielded doors set under a radial fanlight. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — TW postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Richmond has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with London planning before ordering.
Price and lead time in Richmond
Timber Front Doors start at £1,350 per door supplied and fitted, VAT included. Typical lead time is 6–8 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Should a front door open in or out?
Almost always inwards in the UK, so the weatherbar and the rebate can shed water outwards and the hinges are protected from the elements.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Georgian townhouse?
Six raised-and-fielded panels under a fanlight, in a painted finish. Proportion is everything: the panels step in size up the door rather than repeating equally.
What if I only want a repair?
Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Nearby
We cover the rest of London too.
Get a fixed price for Richmond
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.