Crewe · Cheshire · CW postcodes
Timber Sliding Patio Doors in Crewe
We make and fit Timber Sliding Patio Doors throughout Crewe — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Crewe
Crewe sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Crewe is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — CW postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Price and lead time in Crewe
Timber Sliding Patio Doors start at £4,200 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is lift-and-slide?
Turning the handle lifts the sash off its seals onto rollers, so it glides. Releasing it drops the sash back down and compresses the seals, which is why it holds weather far better than a simple slider.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
How secure is a timber door?
A well-built timber door with a multipoint lock and reinforced keeps is at least as secure as a composite equivalent. The lock and the frame fixings matter more than the leaf material.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
How do I look after the finish?
Wash the door twice a year with mild soapy water and check the bottom rail and cill for standing water. Recoating intervals depend on exposure and aspect — south and west elevations go first.
Nearby
We cover the rest of Cheshire too.
Get a fixed price for Crewe
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.