Shanklin · Isle of Wight · PO postcodes
Timber Sliding Patio Doors in Shanklin
We make and fit Timber Sliding Patio Doors throughout Shanklin — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Shanklin
Shanklin sits on the coast, so doors here deal with salt-laden air as well as rain. Salt is hygroscopic — it holds moisture against the surface long after the weather has passed — which is why standard softwood and standard ironmongery both fail early within about a mile of open water.
Housing in and around Shanklin is largely 1920s–1930s semi-detached stock, which suits three-panel doors with a wide glazed head, often in a sunburst or geometric lead pattern. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Highly exposed — PO postcode area
- Timber
- Accoya or a dense hardwood such as sapele
- Weather detail
- a storm-rated weatherbar, deep drip mould and a rebated hardwood cill
- Ironmongery
- Grade A4 marine stainless steel
- Recoating
- Every three to five years on the weather elevation
Price and lead time in Shanklin
Timber Sliding Patio Doors start at £4,200 per set supplied and fitted, VAT included. Typical lead time is 10–12 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What is lift-and-slide?
Turning the handle lifts the sash off its seals onto rollers, so it glides. Releasing it drops the sash back down and compresses the seals, which is why it holds weather far better than a simple slider.
How often should a coastal door be recoated?
Three to five years on exposed elevations, against seven or more inland. Salt-facing elevations always go first.
What timber holds up best near the coast?
Accoya first, then dense hardwoods. Modified timber barely moves with humidity swings, which is exactly the load a coastal door is under.
What door suits a 1930s semi?
A three-panel door with a wide glazed head, often leaded in a sunburst or geometric pattern. The glazed area is proportionally larger than on a Victorian door.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
How do I look after the finish?
Wash the door twice a year with mild soapy water and check the bottom rail and cill for standing water. Recoating intervals depend on exposure and aspect — south and west elevations go first.
Nearby
We cover the rest of Isle of Wight too.
Get a fixed price for Shanklin
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.