Hereford · Herefordshire · HR postcodes
Timber Stable Doors in Hereford
Timber Stable Doors made to measure for homes across Hereford, surveyed on site and finished in the workshop before they are hung.
Specifying a door for Hereford
Hereford is a relatively sheltered inland location, so the specification is driven more by how the door looks and how secure it is than by weather resistance.
Housing in and around Hereford is largely Victorian terraced and villa stock, which suits four-panel doors with a bolection moulding and an etched or obscured upper light. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Sheltered inland — HR postcode area
- Timber
- Engineered redwood, or oak where the grain is wanted
- Weather detail
- a standard weatherbar and drip mould
- Ironmongery
- Standard quality ironmongery in your chosen finish
- Recoating
- Every seven to nine years on the weather elevation
Planning note. Hereford has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Herefordshire planning before ordering.
Price and lead time in Hereford
Timber Stable Doors start at £1,600 per door supplied and fitted, VAT included. Typical lead time is 6–8 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
Do the two halves lock together?
Yes. A stable door has a shootbolt or drop bolt that ties the leaves so the whole door operates as one when closed.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
Do you fit as well as supply?
Both. Most customers take supply and fit, which keeps the guarantee in one place. Supply-only is available if you have your own joiner.
What glazing goes in a timber door?
Sealed units in a range of obscure, etched, leaded and clear finishes, bedded and beaded from the inside so the glass cannot be removed from outside.
Nearby
We cover the rest of Herefordshire too.
Get a fixed price for Hereford
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.