Bath · Somerset · BA postcodes
Victorian Timber Doors in Bath
We make and fit Victorian Timber Doors throughout Bath — measured properly, built from timber chosen for the exposure, and adjusted once they are in.
Specifying a door for Bath
Bath sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Bath is largely Georgian and Regency townhouse stock, which suits six-panel raised-and-fielded doors set under a radial fanlight. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — BA postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Planning note. Bath has designated conservation areas and a number of listed frontages. Conservation status can remove permitted development rights on front elevations, and an Article 4 direction can tighten that further. Replacing like-for-like in timber is rarely a problem; changing the material or the glazing pattern usually is. We produce the elevations, sections and written specification a planning or listed building consent application needs. Check with Somerset planning before ordering.
Price and lead time in Bath
Victorian Timber Doors start at £1,650 per door supplied and fitted, VAT included. Typical lead time is 7–9 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What makes a door authentically Victorian?
Four panels with the upper pair taller, a bolection moulding standing proud of the panel face, and stiles wide enough to look right — usually 115mm or more.
What do conservation officers usually object to?
Wrong material, wrong glazing pattern, and mouldings that are close but not right. Timber matching the original pattern is rarely refused.
What drawings will I need for an application?
Usually an elevation at 1:20, a section through the door and frame showing mouldings, and a written specification of timber, finish and glazing. We produce these.
What door suits a Georgian townhouse?
Six raised-and-fielded panels under a fanlight, in a painted finish. Proportion is everything: the panels step in size up the door rather than repeating equally.
Do I need building regulations approval?
Replacing a door like-for-like usually does not need approval, but the new door must meet current thermal and safety-glazing standards. We specify to comply as standard.
Can you make non-standard shapes?
Arched heads, splayed jambs, tapered cills and out-of-square openings are routine. Old buildings are rarely square and we build to the opening as found.
Nearby
We cover the rest of Somerset too.
Get a fixed price for Bath
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.