Queensferry · Flintshire · CH postcodes
Victorian Timber Doors in Queensferry
Our Victorian Timber Doors are made to order for Queensferry, spray-finished and cured before delivery so the door arrives protected.
Specifying a door for Queensferry
Queensferry sees a normal share of west-coast weather without the salt load of a seafront opening. Engineered stiles and a properly sealed bottom rail handle it comfortably.
Housing in and around Queensferry is largely stone and rendered cottage stock, which suits ledged, braced and boarded doors with a plank face and long strap hinges. We match the mouldings and panel proportions to what is already on the street rather than fitting a generic pattern.
- Exposure
- Moderately exposed — CH postcode area
- Timber
- Engineered redwood or hardwood
- Weather detail
- a full weatherbar, drip mould and rebated cill
- Ironmongery
- Stainless or quality plated ironmongery
- Recoating
- Every five to seven years on the weather elevation
Price and lead time in Queensferry
Victorian Timber Doors start at £1,650 per door supplied and fitted, VAT included. Typical lead time is 7–9 weeks from survey. Use the indicative price tool for a range in about a minute.
Common questions
What makes a door authentically Victorian?
Four panels with the upper pair taller, a bolection moulding standing proud of the panel face, and stiles wide enough to look right — usually 115mm or more.
What door suits a stone cottage?
A ledged, braced and boarded door with long strap hinges. Openings are usually low and rarely square, so the door is made to the opening as found.
How do I get an indicative price quickly?
Use the guide-price tool, or send sizes and a photograph. Either gives a realistic range within a working day.
Do you survey before quoting?
We give an indicative price from sizes or photographs, then survey free of charge before anything is made. The survey is what turns an estimate into a fixed price.
What timber do you use?
Engineered redwood for painted doors, dense hardwoods such as sapele or idigbo where more strength is wanted, European oak where the grain is the point, and Accoya on exposed and coastal openings.
Can you match an existing door?
Yes. We take the mouldings, panel proportions and glazing pattern from the original and reproduce them. If the door is beyond saving we can still copy it before it goes.
Nearby
We cover the rest of Flintshire too.
Get a fixed price for Queensferry
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.