South West England
Timber Door Repairs in Cornwall
Homes in Cornwall get Timber Door Repairs built around the opening they have, with the timber and finish specified against local conditions.
8 of the 12 towns we cover in Cornwall are coastal, where Accoya or dense hardwood and marine-grade stainless ironmongery are the sensible specification, and 5 carry designated conservation areas where the glazing pattern and mouldings need to match what is already there.
A timber door is a structural component that happens to be decorative. Get the species, the finish and the weatherbar right and it will outlast anything moulded; get them wrong and it will swell, drop and stick within a couple of winters.
Price and lead time in Cornwall
Timber Door Repairs start at £320 per visit supplied and fitted, VAT included, with a typical lead time of 1–3 weeks. Try the indicative price tool for a range, or send sizes and we will be closer.
Common questions
Can rot be repaired or must the door be replaced?
Localised rot is cut out and spliced with matching timber, which is standard joinery practice. If it has reached the joints and the door is racking, replacement is the honest answer.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
How energy efficient is a timber door?
A modern insulated timber door with a sealed unit performs comparably to composite alternatives, and timber itself is a far poorer conductor than aluminium or steel.
What finish options are there?
Factory spray in any RAL or heritage colour, translucent stains, and natural oils on oak. All applied and cured in controlled conditions before the door ships.
Other doors in Cornwall
Get a fixed price for Cornwall
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.