East Midlands
Painted Timber Doors in Lincolnshire
If you are replacing a door in Lincolnshire, Painted Timber Doors are cut to your actual opening rather than to a nearest standard size.
4 of the 12 towns we cover in Lincolnshire are coastal, where Accoya or dense hardwood and marine-grade stainless ironmongery are the sensible specification, and 2 carry designated conservation areas where the glazing pattern and mouldings need to match what is already there.
The difference between a door that lasts eight years and one that lasts thirty is mostly invisible from the street: the joint type, whether the stiles are engineered, whether the bottom rail is sealed, and how the water gets away.
Price and lead time in Lincolnshire
Painted Timber Doors start at £1,450 per door supplied and fitted, VAT included, with a typical lead time of 6–8 weeks. Try the indicative price tool for a range, or send sizes and we will be closer.
Common questions
Is a factory-sprayed finish better than painting on site?
Considerably. Spraying gives an even film thickness on all six faces including the top and bottom edges, and it cures in controlled conditions rather than in whatever weather turns up.
Can modern sealed units go in a heritage door?
Slim-profile units down to around 11mm can, and they are frequently accepted where a chunky modern unit would not be. Some listed buildings still require single glazing.
Do I need permission to change a door in a conservation area?
Often. Conservation area status can remove permitted development rights for front elevations, and Article 4 directions tighten it further. Check with the local planning authority before ordering.
What door suits a Victorian terrace?
A four-panel door with a bolection moulding and an etched or obscured upper light. Stile widths matter — narrow modern stiles make the proportions look wrong immediately.
What if I only want a repair?
Then we quote a repair. Splicing a bottom rail, easing a dropped leaf or replacing a failed cill is often the right answer on a door worth keeping.
How long does a made-to-measure timber door take?
Most doors run six to ten weeks from survey to fitting, depending on the specification and the finish. Repairs and re-hangs are usually inside three weeks. We confirm dates at survey rather than guessing at enquiry stage.
Painted Timber Doors town by town
Specification changes with exposure and housing character — each town page says how.
Other doors in Lincolnshire
Get a fixed price for Lincolnshire
Send sizes or a photograph and we will come back with an indicative range, then survey free of charge before anything is made.